The switch panel for the lights in the Wyatt Auditorium is located
in the workroom (backstage / stage right) inside the dimming rack directly
above the breaker box. (The circuit breakers should remain on since
turning them off would switch the safety lights over to backup power.)
Switches 1 - 3 control the lights in the house. Switches 4 & 5 control the
backstage and stage lights. Switch 6 controls the in-wall walkway lighting.
Switches 7 - 12 control the theatrical lighting.
1- Back of the house
2- Middle of the house
3- Front of the house
4- Stage lights
5- Backstage lights
6- Walkway wall lights
7 thru 12 – Theatrical lights
Sliding the switch to the outside of the panel [< l >] selects the On position, and sliding the switch to the center of the panel [ >l< ] selects the Off position. Use caution to to touch only the black plastic switch box when turning On and Off.