Turning on the Projector

  1. Locate the projector remote control
  2. Point the remote at the projector (not the screen or wall)
  3. Press the power button
  4. Wait - at least 30 seconds. It generally takes about 30 seconds before the projector bulb warms up and actually starts to shine light.

* Make sure that the projector is set to use INPUT A. If not, there is a button on the remote to change the input. (Older Sony remote controls there is a grey button with a switch in the upper left hand corner to select the input.  It should be set to "A".  The newer small white remote controls have to be selected by the "input" button.)

Contact the Help Desk if you are not able to find the projector remote control or if you unable to make the projector -- project.